SAE NEUTRAL
SAE NEUTRAL is a neutralizing liquid to eliminate any residual acid traces. Product based on special silicates, suitable for neutralizing drinking water systems in compliance with the classifications of the current EEC lists. Thanks to the new technology we can avoid long rinses for neutralization. SAE NEUTRAL was developed to guarantee total neutralization of systems, even in domestic drinking water pipes. We recommend using the SAE NEUTRAL product after any cleaning or maintenance operation to eliminate acid residues.
1 liter bottle
5 liter canister
Instructions for Use
SAE NEUTRAL is used after chemical washing based on acid or similar products. Cleaning acids usually act with a pH value of 1, highly acidic, so after washing it must be ensured that there are no acid residues or traces in the system.
Neutralization of the heating system
• Empty the system and remove all the acid used for cleaning.
• Insert SAE NEUTRAL mixed with water and circulate it inside
for about 20 minutes.
• Drain the system and check the pH value if necessary.
Neutralization of the sanitary system
• Empty the system and remove all the acid.
• Insert SAE NEUTRAL mixed with water and circulate inside for approximately 20
minutes. Drain the system and let the water flow for approximately 3-5 minutes, check the pH value using the strips and table supplied with the package. The pH value must be between 7 and 8.
Mixture proportions
(1 liter SAE NEUTRAL with 20 liters of water) Attention: the product must not be over or under dosed.